Free shipping on orders over $50!*
The Sstealth Spike, from Savage Gear, is engineered to give the 3D Craw a unique back sliding action that falls away from the angler. The pairing of Savage Gear's 3D Craw and this stealth spike produces a realistic action displayed by a fleeing crawfish as it scoots away along the bottom seeking refuge from nearby predators. floating up in the air fending off would be predators. Insert the round side of the Stealth Spike, which looks somewhat like the bend in a paper clip, directly through the mid part of 3D Craw until it sits directly below the antennae. Press the back of the bait into the little bait keeper to secure it in place. Next, take the included circle hook and thread it through the nose of the bait making sure it also passes through the round part of the spike. Voila, you're ready to fish. For best results cast this around obstructions such as docks or trees or work it away from the boat on points and shoals. Make sure you leave some slack in your line as the bait will travel away from you and take line as it descends. We offer the Savage Gear Stealth Spike in two sizes: 1/10oz - 1/0 hook (3 spikes + 3 hooks) and 1/3oz - 2/0 hook (2 spikes + 3 hooks).
Barbless No Escape is a factory barbless hook that complies with all barbless regulations. Very similar to Owner's SSW design, but incorporates a "V" bend deep in the gap and an elongated point to encourage hooked fish to remain hooked in that deep throat. A slightly up eye allows the hook to be threaded through bait with minimal damage.
The TitanX Wacky/Neko Weedless Hook features a non-reflective, natural look that won´t spook the fish in clear conditions, but provide 4 times better penetration as well. With the addition of a double fiber weedguard, you'll be able to venture in to grassy, flooded brush or other challenging areas. Made for multiple techniques such as Wacky, Neko or Drop shot rigging. “They are the best drop shot/wacky rig hooks I have ever used” - says Mustad Pro Staff Kevin VanDam - and he has the tournament wins to prove it. The extra fine wire delivers the perfect combination of finesse and strength, throughout the different sizes. Perfect for using with a great variety of soft plastic worms, targeting deeper lying fish around structures, drop-offs or ledges. This technique has a great variety of applications in both fresh and saltwater, targeting Largemouth or Smallmouth Bass, Northern Pike, Muskie, Perch, Zander, Walleye, Brown Trout, Redfish, Speckled Sea Trout, Snook, Redfish, Striped Bass, Cod or Dorado/Mahi Mahi. The TitanX Wacky/Neko hook has also become popular among saltwater fly fishermen when tying crab imitations targeting Redfish, Bonefish, Black Drum and Sea Trout.
The Beatdown is a stubby finesse bait that will take Ned Rigging to new levels of effectiveness. This is a technique where the key is to do less and don’t overthink it. If you want to experience fast action and lots of bites, you need to let it do its thing on light line, usually 6- or 8-pound test.
Each Rage Tail lure has a unique and exclusive tail design and is engineered like no other soft plastic bait. Each is designed with a specific purpose and uses customized hi-grade plastics for superior action.
The Magnum Rage Bug is designed for use behind the Jointed Structure Head, but great as a flipping or Carolina Rig bait or jig trailer. Features Rage Tail flanges for a very subtle action at very slow speeds.
The Strike King Magnum Rage Bug measures 4.5" in length and comes 6 per pack in several excellent colors.
The Yamamoto Baits Swimbait is a soft plastic swimbait style lure designed to mimic shad or minnows that many species of fish feed upon. A first glance the Yamamoto Swimbait may look fairly basic, but once the bait is in the water you'll immediately see why its become so popular. The 3.5" swimbait not only displays the perfect baitfish profile, but it also captures the natural swimming motion of a real fish. At any retrieval speed, whether just crawling it along or burning it in, the Yamamoto Swimbait exhibits a side to side tail kick that really thumps. This swimbait has already proven to be a real winner for freshwater species of bass including largemouth, spots and smallies, but it also performs incredibly when targeting the inshore variety. Bay bass, rockfish and stripers fall victim to this swimbait with regularity. The best rigging option is with the Yamamoto Swimbait Head, but another popular method is on the back of a fish head spin lure.
Prostaff Brent Ehrler developed and fine-tuned the new G-Finesse Stinger for use with the popular Neko rig technique. Tournament Grade Wire and Nano Smoothcoat are game-changing features. Incredible hook up percentage and increased retention once fish are hooked. 6 per pack.
The brainchild of pro-staffer Mike McClelland. Incorporates a distinctive new acute hook angle to keep baits aligned perfectly straight. The Nano Smooth Coat finish makes it easy to thread the thinnest finesse baits or the fattest Senkos with ease. Add industry-changing Tournament Grade Wire (TGW) to the package and things couldn’t be more perfect. 4 per pack.
At last, an easy-to-rig nail weight solution for ElaZtech® softbaits that doesn't require gluing in weights or cutting and melting plastic! The unique keeper design of the Neko ShroomZ is easily inserted into our 10X Tough material and stays put securely, even after repeated casts and fish catches. Anglers can now take advantage of the extreme durability and buoyancy of ElaZtech for Neko rig presentations, or other new finesse techniques like the Tiny Child Rig.
Silver Horde Gold Star Kingfisher Spoons are extremely lightweight and have the ability to produce moves that no fish can resist! These spoons are effective on a variety of freshwater and saltwater species, especially salmon and pike. Silver Horde Gold Star Kingfisher Spoons can be fished alone or in conjunction with a dodger or flasher for some added flair. Silver Horde Gold Star Kingfisher Spoons are made in the U.S.A.
Get ready for some Horror top water attacks! 3D Bat, the most realistic and incredible Crawler you have ever seen! The 3D Bat will amaze you with the perfect 3D scanned details, superior crawling action, with a distinct plopping sound, that will call in predator fish from wide and far! Hard ABS body, with Stainless steel wings – built to withstand brutal attacks! Retrieve will see the lure scatter over the surface, like a Bat in trouble trying to swim to shore! Change retrieve speed once in a while and throw in a spin stop, or try just to steady retrieve all the way to the bank! Keep rod tip relative high on retrieve. Great lure for Bass, Pike, Musky and big brutal catfish!
The Yamamoto Single Tail Grub is a soft plastic grub bait from
the mind of legendary bait designer and Senko creator, Gary Yamamoto.
The effectiveness of grubs is often overlooked, but anglers across the
country have found a lot of success using these baits on suspended bass.
The bait is best rigged with a round ball head jig and swam around
steep bluff walls. Simply count the bait down to the desired depth and
reel it slowly through the fist, similar to how a swimbait would be
retrieved. River fishing is another location that a grub is a great
choice. Locate eddys in moving water and retrieve the bait slowly
through them to attract strikes. Single tail grubs are also effective
when used as a trailer for jigs and spinnerbaits. The grub will create
more water resistance for a slower fall and added water displacement.
This single tail grub is 5" long and comes 20 per pack.
The Silver Horde Gold Star Tailwagger (AKA Hoochie Hook) combines a 3" Kingfisher spoon with a 2" micro squid making for an irresistible target to good to pass up!
Aaron Martens designed Finesse Heavy Cover, now available in Tournament Grade Wire (TGW) and Nano Smooth Coat finish. 4 per pack.
Perfectly engineered to penetrate quickly and lock in tight with the patented Trapper Box design and Piercing Point. The Trapper Treble is the complete solution to replacing the standard stock Round Bend treble hooks.
#2 contain seven hooks; #3, #4, #5, #6 contain eight hooks.
The 6th Sense Crush 50X Crankbaits are shallow diving square bill crankbaits that feature incredibly detailed paint finishes designed to mimic the action and appearance of several types of forage fish bass often feed upon. The Crush 50X Crankbaits, from 6th Sense Lures, possess a shallow diving, tight-wobbling action that is ideal for shallow cranking applications when targeting bass in and around shallow cover. The 6th Sense Crush 50X square bill crankbaits enable the angler to crash the lure through thick shallow cover, ripping it out of grass, over rocks, or just burning it in open water. Diving up to 5 feet in water depth and fitted with sharp VMC black nickel hooks, these crankbaits simply catch more fish. A premium paint scheme with realistic 3-D gill plates, 3-D eyes, and 3-D scales really brings this bait to life.
It's difficult to completely relate the realism offered by the 6th Sense Crush 50X Crankbaits. The finishes of these baits are highly detailed and deliver a seemingly custom paint job to a mass produced crankbait in all of the most popular colors for bass fishing. Complimenting the aesthetics are premium components, a dialed in action and super strong hooks; this bait is a true winner that will produce over and over again. The 6th Sense Crush 50X Crankbaits are 2 1/4" in length, weigh 3/8oz and can be expected to dive up to 5 feet. Our inventory includes a great selection of the most sought after color patterns.
The Sep's 4/0 Pro Dodger is a trolling dodger commonly employed by anglers trolling lures for Kokanee, Lake Trout and Salmon. The 4/0 Pro Dodgers, from Sep's Fishing, are one of the most popular choices when trolling at slow speeds due to its' erratic action, flash and vibration - all transmitted to the trailing lure to attract strikes from big Kokanee or Trout. The flash and action of Sep's Pro Dodger is really going to attract attention from any nearby fish and ultimately lead them to striking the seductive action of the trolled lure. The 4/0 size of the Pro Dodger is the smallest in the Sep's lineup and measures 1 1/4" wide by 4" long which is absolutely ideal for trolling in lakes when after big Kokanee and Trout. We offer the 4/0 size of the Sep's Pro Dodger in a vast array of color options including the wildly popular UV colors.
The OPS 4.5" rigged hoochie is a skirted trolling lure designed for placement behind flashers or dodgers when targeting species such as Chinook, Pink Salmon, Kings and Steelhead. Using the classic hoochie skirt style Outdoor Pro Shop has developed one of the most popular and price conscious hoochies on the market today. The 4.5" size of this hoochie establishes it as a great salmon or halibut. To make things easier, we rigged this with a 24" 30lb test leader and added 2 5/0 hooks so you're ready to go!
Perfectly engineered to penetrate quickly and lock in tight with the patented Trapper® Box design and Piercing Point®. The Trapper® Treble is the complete solution to replacing the standard stock Round Bend treble hooks. Made with XXX Heavy Gauge Wire.
#1 and #2 contain seven hooks; #4 and #6 contain eight hooks.
A Weedless version of our G-Finesse Stinger, developed by prostaff Brent Ehrler. Ehrler’s Stinger is designed for use with the popular Neko Rig technique, as well as other finesse techniques. Tournament Grade Wire and Nano Smoothcoat are game-changing features. Incredible hook up percentage and increased retention once fish are hooked. 4 per pack.
The unique swimming action of the X-ON spoons imitates the swimming action of a wounded fish, which triggers your target to strike.The recommended trolling speed is 2-3 MPH with an optimal speed of 2.5 MPH. Available in a variety of color patterns
The POINTER has been designed with a very low center of gravity through the use of special brass weights. The low center of balance causes the lure to wobble and vibrate whenever the retrieving motion is stopped. The POINTER will suspend 4 -5 feet deep and will emit an intriguing bass-calling vibration, while in the suspended state. A short twitch of the fishing rod will generate the "Walk the Dog" action under the water.
The VK Salmon Flasher has been designed to attract fish from long distances and pique their interest in the bait being trolled. Designed by VK Veivi of Finland, these meticulously built flashers have been field tested and have proven to catch lunker salmon and trout.
The 5.5" Wag Tail from ABT Lures is another great member of the Wag Tail family. With a stunning appearance and durable construction, these swimbaits are definitely in the top of their class.
I-SLIDE brings all-new features to the “S-Motion” bigbait category.
The built-in MAGHOLD System generates a magnetic field behind each hook hangar, cradling the needle-sharp treble hooks alongside the Megabass I-Slide 185 Swimbait’s body. This not only eliminates the unnatural profile of dangling hooks for an especially deadly clear-water presentation, but aligns the hook-points for an ideal hookset.
The Megabass I-Slide 185 Swimbait is designed to perform a perfect “360 turn” with a twitch of the rod to trigger bites from curious followers. Holding the hooks in place also streamlines I-SLIDE’s motion, allowing for smooth, consistent “S” swimming action during steady retrieve, and reduces slack-line tangles when executing sharp turns and 360-degree action.
Launch the Megabass I-Slide 185 Swimbait into the morning mist, and this next-generation “S-Motion” big-bait will deliver the key advancements to land that sought-after monster.
A new monster slayer from Megabass! The I-Wing 135 swimbait scoots across the surface flapping its wings causing a commotion that can't be ignored. On a high-speed retrieve, the body takes on a hover action while the wings create a tantalizing buzzing action as it skims across the water. The built in Rudder Action Balancer System, combined with the wing action makes for a life-like movement on retrieve. If that weren't enough, the built in weight makes a clacking noise that will be heard over a wide area. Want big fish? Give the I-wing a look!
Okuma Classic Pro XP reels equip with stainless steel reel foot for strength, aluminum power handle with T-style knobs, stainless steel leverwind line guide system insures proper knot clearance when fishing with double lines.
The SLG technology incorporates a dual-step pinion gear system on star drag reels that allows positive engaging at extreme high speeds. The SLG system allows for instant gear engagement when engaging from freespool to strike at speeds in excess of 50 MPH.
Okuma's all-new "Carbonite" drag system features a newly-developed carbon-based drag material which displaces heat and friction consistently and steadily even under the harshest of fishing conditions. Used in conjunction with a small amount of specially-formulated Okuma drag grease, the Carbonite drag system allows for a much wider and smoother drag range, all while maintaining exceptional performance and pure fish-stopping power.
The self-lubricating gear system is a feature found on Okuma's higher-end star drag reels. The main gear on this system incorporates a heat-sensitive oil-impregnated brass bushing that is mounted in the center of the gear. This system releases oil if friction increases to keep the main gear and drive shaft running smoothly in all conditions. Okuma is the first company to adopt this technology which originated in the large machine industry where this function has been time tested for many years.
This heavy-duty, stainless steel levelwind is Titanium coated and built to withstand the punishment of braided and wire lines. The guide has been designed with an increased opening to insure proper knot clearance when fishing with double lines. This wide space allows for Albright or similar connection knots, as well as swivels and copper line to pass through the guide easier and be wound directly on the spool.
The Lew's Custom Speed Spin is built around a strong aluminum body and side plate, high strength and lightweight C60 Carbon skeletal speed rotor and comes with high strength Speed Gears cut on precision Hamai CNC gear hobbing machines. The Custom Speed Spin features a flush and drain port for easily application of spray lubricant.
Serving anglers with a premium line counter reel in both right and left hand retrieve, Okuma proudly introduces the Cold Water Reel. The Cold Water Reel family is constructed upon a powerful star drag foundation including heavy-duty machine cut brass gears, dual anti-reverse systems and full Carbonite drag system with up to 20-pounds of maximum drag output. The custom line counter includes new Okuma anti-fogging Clear View Technology, and should the counter be overwhelmed by water, an access port allows the interior to be dried completely. The line counter’s reset button has also been recessed and placed on the side of the unit to eliminate errant resets. We offer the Okuma Cold Water Linecounter Reels in four sizes - both RH and LH: 153, 203, 303 and 453 (RH Only). Please see the chart below for more detailed specs on each model.
Introduced in 2005, the original MAX series was an instant hit.
Light, sensitive, clean, and equipped with quality components, these cutting-edge rods completely shook up the bass market. With that said, as time progressed Powell began expanding their product offerings to the point where they decided to move on from that ultra-popular series. Despite those rods being a thing of the past, they were never forgotten. Many customers simply missed the MAX rods and continually expressed a desire for them to return to the lineup. Well, they're back!
Reminiscent of the originals, the new MAX rods are upgraded with premium components and technology. Featuring split cork grips, Fuji reel seats, Fuji SiC guides, and the special MAXUMFIBER blanks, this series now offers even more extreme performance than before. Just like every Powell rod, they've fine tuned each model with technique-specific lengths, powers, and actions for the utmost in fishability. On top of all this goodness, some new models are now in the lineup that were not previously offered in the original series. What are you waiting for? Take your bass fishing to the MAXimum level!
The Accurate Fury Reels are single drag, saltwater reels featuring a single speed gear ratio. Accurate, known for their TwinDrag technology, have ventured into the single drag reel market with their Fury models of reels. These reels, like their “Boss Extreme” counter parts, are made of 6061 T6 billet aircraft aluminum for lightweight and strength. They feature a very simplistic design with stainless steel gears, wet drag for smoothness, and an ergonomic rubber handle that fits perfectly in your hand. They come with a brushed aluminum finish, are lighter, more comfortable, and very easy to use. These reels were designed with fishermen’s needs in mind. If you are chasing bullet tuna, Schoolie Dolphin, or trying to catch your first White Seabass, the Boss Fury has a size to meet your fishing needs at an affordable price.
Accurate's Fury Reels are more or less an introductory reel from Accurate, however, they still feature high quality components and the precise engineering Accurate is known for. The Fury Reels have been machined with a simpler, more straight forward design which allows them to be price competitive with the mass produced reels of other companies while still providing the specialized touch only they can deliver. The Fury Reels still feature a double-dawg anti-reverse which is incredibly durable and will all but eliminate any mechanical failure during the fight. As many anglers are aware, over time bearings will fail, its simple mechanics, but the dawg design will prove to withstand the test of time. Aesthetically, the reels do possess a slightly different appearance due to their brushed finishing process as opposed to the polished aluminum finish displayed by other Accurate models of reels.
The Fury Reels are engineered with a single speed 6.1 gear ratio.The Fury reels maintain the same sizes as the Boss Extreme models, in other words, the 400 size of the Boss Extreme is exactly the same as the 400 size Fury - this was achieved by using a double side plate on the non handle side of the reel.
Make room for the concept Z's big brother, the Concept Z3. Manufactured with American made CZB (Concept Zero Bearing) polymer tehnology bearings, and build tough as nails. This is one of the lightest of its size on the market but it's not lightweight. The Concept Z3 boasts an incredible 30+ lbs of drag and HUGE Hamai cut hardened brass H.A.M. gearing to handle fish way out of its league.
The Z3 is built tough for big fish and big bait situations. Catching trophies on big baits? If so expect the Z3 to deliver effortless distance with its upgrated high spin spool shaft an urivaled durability with its zero corrosion CZB bearing system. This reel is as comfortable in the ochean as it is on the toughest lakes in the world.
Built on the exclusive SLP Super Low Profile platform, which is Lew’s lowest profile design. The Pro-Ti with a aluminum frame and titanium deposition finish, insures that you will never again have to sacrifice strength for style. The Pro-Ti has hard aluminum alloy Speed Gears, cut on a precision Hamai CNC gear hobbing machine, Externally adjustable 6-pin 27 position QuietCast Adjustable Centrifugal Braking system, Premium 11 bearing and a rugged carbon fiber drag system providing up to 20 pounds of drag power.